Grout Cleaning Ipswich Tips: Oxygen Bleach for Cleaning Tiles and Grouts

The best way to keep your tiles and grouts clean is to keep it clean in the first place. Tiles are relatively easy to clean, as often times, they are smooth in surface and doesn’t trap dirt or scum. Grouts on the other hand, is a combination of sand, cement and water, and it traps dirt and becomes a breeding ground of harmful and disease-causing bacteria. This is why to save yourself from the demanding thorough cleaning, you need to keep it clean as much as you can before it turns from white to dark. Though you can always get the services of grout cleaning Ipswich has for thorough cleaning, there are basic things you can do to keep your tiles and grouts in good and sanitary condition. One good way to keep your tiles and grouts clean is by using oxygen bleach. Here is one great cleaning tip many Brisbane tile and grout cleaning companies suggest to their clients for maintaining their tiles and grouts.

Before You Start the Thorough Cleaning Process

Before you actually start the cleaning process, make sure you remove surface dirt and crumbs by wiping down the surface of the tiles, including the thin lines in between. You can follow your regular tile cleaning regimen by mopping and/or sweeping the surface. Then perform this grout cleaning Ipswich tip.

 grout-cleaning-ipswich

Oxygen Bleach For Cleaning Grouts

First Step

Oxygen is a safe cleaning compound that works not just in dissolving dirt and grime in between tiles, but also helps get rid of disease-causing bacteria. To use oxygen bleach, make your own solution by mixing equal amount of warm water and bleach. Let the mixture dissolve.

Second Step

Pour your solution to a spray container and shake well. To clean your tiles, choose a specific area to start your cleaning. It should be no longer than 1 to 2 square feet at a time. Spray your cleaning solution to the grout generously. Leave it for ten (10) to twenty (20) minutes to sink in and soften the dirt trapped in the lines.

Third Step

Start cleaning by scrubbing the grout. You can use a small brush, like a used toothbrush to scrape off dirt from the grout. You can spray more bleach as you need to effectively remove dirt and speed up the cleaning process.

Fourth Step

During the scrubbing, you will see dirty liquid created on the surface. Wipe off this dirty liquid with a dry cloth or mop. Squeeze and wring the cloth (or mop) in a separate bucket between uses. Doing so will help you finish the cleaning faster in the end. Check out http://www.readycleaning.com.au.

Fifth Step

Continue washing your grout and repeat the whole process by applying the mixture to other areas. Scrub it off until you have finished the whole tiled area. For stains that are tougher to remove, apply generous amount of bleach on the surface and let it sink to the surface for an hour or longer. The longer you let the oxygen bleach soak, the softer the stains become, the easier it will be to scrub them off.

Sixth Step

Wrap up the cleaning by mopping up the floor as you usually would. You can damp your mop with water and use it to remove both bleach and dirt on tiles and grout, and will leave the surface good as new.

For larger areas that need more thorough cleaning, you may need the help of certified tile cleaning Brisbane experts to do the job for you. Some deep grout dirt may need steam cleaning Brisbane’s service to effectively clean the surface and make it sanitary. Ready Cleaning Services offers various cleaning services for both commercial and domestic needs, and is one of the most reputable companies in grout cleaning Ipswich.

Leave a Reply

Your email address will not be published. Required fields are marked *